MISHIMOTO MMICP-F2D-08HBK HOT SIDE INTERCOOLER PIPE & BOOT KIT

MMICPF2D08HBK_Mishimoto.jpg
MMICPF2D08HBK_Mishimoto.jpg

MISHIMOTO MMICP-F2D-08HBK HOT SIDE INTERCOOLER PIPE & BOOT KIT

315.00

The Mishimoto MMICP-F2D-08HBK Hot Side Intercooler Pipe & Boot Kit for your 2008-2010 Ford 6.4L Powerstroke are a direct-fit upgrade for your factory components. The factory pipe and boot features numerous restrictive bends and does not stand a chance against the heat and pressure of your high-powered 6.4L; upgrade to the Mishimoto 6.4L intercooler pipe kit for increased reliability, durability, and performance. 

The Mishimoto hot-side intercooler pipe is constructed of mandrel-bent aluminum with a polished finish. The engineers at Mishimoto designed this kit to be a two-piece pipe kit, compared to the factory one-piece pipe, allowing for much easier installation and removal. The Mishimoto hot-side intercooler pipe eliminates restrictive bends in the factory pipe, allowing for improvements in airflow, power, and EGTs.

This kit includes Mishimoto Silicone Boots with DuraCore™ technology. Mishimoto DuraCore™ technology is the synthetic material that comprises the innermost layer of all Mishimoto Silicone Diesel Boots. Compared to normal silicone, DuraCore™ provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts.

To add even more reliability, this kit includes Mishimoto Constant-Tension T-Bolt Clamps for accurate and consistent holding power. This hot-side pipe and boot kit is the perfect addition to the Mishimoto 6.4L Powerstroke Performance Intercooler and Mishimoto 6.4L Powerstroke Cold-Side Intercooler Pipe and Boot Kit. It is made in the USA and includes the Mishimoto Lifetime Warranty.

Features: 

  • Bolt-On Replacement
  • Replaces Restrictive Factory Pipe
  • 3" Polished Aluminum Construction

Silicone Boots with DuraCore:

  • Boot 1: 3.00” to 3.20”
  • Boot 2: 3.00”
  • Boot 3: 3.00”

Constant-Tension T-Bolt Clamps:

  • (5) 3.25” Constant-Tension T-Bolt Clamps
  • (1) 3.75” Constant-Tension T-Bolt Clamp

Fits:
08–10 Ford F-250 w/ 6.4L Powerstroke
08–10 Ford F-350 w/ 6.4L Powerstroke
08–10 Ford F-450 w/ 6.4L Powerstroke
08–10 Ford F-550 w/ 6.4L Powerstroke

Installation Torque Specs
27 in-lbs (3N*M) recommended for all T-Bolt and Constant-Tension T-Bolt Clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).    

Purchase Includes:
(2) Aluminum Intercooler Pipes
(3) Silicone Boots with DuraCore™ Technology
(6) Constant-Tension T-Bolt Clamps
(2) Aluminum Mishimoto "M" Logo Badges
Mishimoto Lifetime Warranty

Quantity:
Add To Cart